CDI Torque TORKY Pre-Set Wrench
CDI's TORKY is a right angle pre-set
torque wrench. Torky is designed for production torque applications
that require higher values than a torque screwdriver can deliver. The
comfortable design eases the strain of repeated uses. The torque value
may be pre-set at the factory or it may be set by the operator
utilizing a torque tester. When the proper torque value is reached, a
momentary release or "break" can be felt.
Features:
- Three models available
- Simple, easy to use design
- Ruggedly built for years of reliable service
- Operates Bi-Directionally
- Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
~ Available in three drive styles to fit most needs. ~
| Part No. |
Drive |
Torque
Range
(in. lbs.) |
Torque
Range
(Nm) |
WxL
Inches |
WxL
Millimeters |
Wt.
Oz. (G) |
| 1501TPA-1 |
1/4" Female Hex |
20-170 in.lbs. |
2 - 20 Nm |
1 X 5.25 |
25.4 X 133.3 |
8.3 (235) |
| 1501TP-1 |
1/4" Male Square |
20-170 in.lbs. |
2 - 20 Nm |
1 X 5.25 |
25.4 X 133.3 |
8.3 (235) |
| 1502TP-1 |
3/8" Male Square |
20-170 in.lbs. |
2 - 20 Nm |
1 X 5.25 |
25.4 X 133.3 |
8.3 (235) |
Note: All models are easily adjusted using a 5/32" Hex Key
