Chatillon K-DFE Digital Medical Dynamometer
The Chatillon®
K-DFE Series is ideal for functional capacity evaluations. This
compact, easy-to-use force gauge is features a load averaging function
ideal for job task analysis and functional capacity evaluations.
Averaging can be based on a load setpoint with hold time. Simplicity
was a key design criteria for both clinicians and technicians.
Measurement accuracy is better than 0.1% full scale. A large,
easy-to-read, high resolution dot matrix LCD display is easy to read.
The gauge displays normal and peak readings, pass/fail results and
statistics based on up to 10 stored results. Measurements are displayed
in ozf, gf, lbf, kgf and N units. The display can be inverted and
displayed results may be “hidden” from the patient during testing.
Digital output (RS232) is standard. Gauge is supplied with Certificate
of Calibration.
The
use of a digital force gauge may be regulated for use by respective
regional health agencies. Please check with your local health agencies
for applicability or restrictions.
Standard Gauge Measurement Functions
- Functional Capacity- Time Based
- Functional Capacity - Strength/Force Based
- Peak Strength/Force
Spec Sheet
Ordering Information
|
Model
|
lbf
|
kgf
|
N
|
|
K-DFE-100
|
100 x 0.1
|
50 x 0.01
|
500 x 0.1
|
|
K-DFE-200
|
200 x 0.1
|
100 x 0.1
|
1000 x 1
|
|
K-DFE-500
|
500 x 0.1
|
250 x 0.1
|
2500 x 1
|
Accessories
| Standard Accessories |
Part No.
|
Capacity
|
Thread
|
| Hook with Latch |
NC002500 |
500 lbf
|
5/16-18F
|
| V-Notch Fixture, Large |
NC000725 |
500 lbf
|
5/16-18F |
| V-Notch Fixture, Small |
NC000721 |
500 lbf
|
5/16-18F |
| Extension Rod, 6-inch |
SPK-FMG-013B |
500 lbf
|
5/16-18 |
| Curved Compression Fixture |
SPK-FMG-142 |
500 lbf
|
5/16-18F |
| Compression Plate, Flat |
SPK-FMG-143 |
500 lbf
|
5/16-18F |
| Palm Fixture (Mushroom) |
SPK-FMG-144 |
500 lbf
|
5/16-18F |
| Compression Plate, Small (Rectangular) |
SPK-FMG-145 |
500 lbf
|
5/16-18F |
| Grasping Loop |
NC002844 |
500 lbf
|
-
|
| Knurled Nut |
NC000857 |
-
|
5/16-18F
|
| Pistol Grip |
SPK-FMG-141 |
-
|
-
|
| Handle Assembly |
SPK-DF-HANDLE |
-
|
-
|
| Battery Eliminator, 120/230V |
SPK-DFX-UBE |
|
|
| Carrying Case |
SPK-FMG-149 |
|
|
