Chatillon® K-DFX Series
For Ergonomic and Physical Assessments
The Chatillon®
K-DFX Series is a compact, easy-to-use force gauge ideal for job task
analysis testing. Simplicity was a key design criteria for both
clinicians and technicians. Measurement accuracy is better than 0.5%
full scale. A large, easy-to-read, high resolution dot matrix LCD
display indicates peak push or pull forces. Gauge is supplied with a
variety of testing accessories for job task analysis, strength
analysis, etc. Gauge is battery powered using two 9V alkaline batteries
(supplied). A battery eliminator with US, EU and UK plus is also
supplied standard. Gauge is supplied with Certificate of Conformance.
Measurements are displayed in lbf, kgf and N units.
The
use of a digital force gauge may be regulated for use by respective
regional health agencies. Please check with your local health agencies
for applicability or restrictions.
Spec Sheet
Model - K-DFX Series (with ISO17025 Accredited Certificate of Calibration)
| Model |
lbf
|
kgf
|
N
|
| K-DFX-100 |
100 x 0.1
|
50 x 0.01
|
500 x 0.1
|
| K-DFX-200 |
200 x 0.1
|
100 x 0.1
|
1000 x 1
|
| Standard Accessories |
Part No.
|
Capacity
|
Thread
|
| Hook with Latch |
NC002500 |
500 lbf
|
5/16-18F
|
| V-Notch Fixture, Large |
NC000725 |
500 lbf
|
5/16-18F |
| V-Notch Fixture, Small |
NC000721 |
500 lbf
|
5/16-18F |
| Extension Rod, 6-inch |
SPK-FMG-013B |
500 lbf
|
5/16-18 |
| Curved Compression Fixture |
SPK-FMG-142 |
500 lbf
|
5/16-18F |
| Compression Plate, Flat |
SPK-FMG-143 |
500 lbf
|
5/16-18F |
| Palm Fixture (Mushroom) |
SPK-FMG-144 |
500 lbf
|
5/16-18F |
| Compression Plate, Small (Rectangular) |
SPK-FMG-145 |
500 lbf
|
5/16-18F |
| Grasping Loop |
NC002844 |
500 lbf
|
-
|
| Knurled Nut |
NC000857 |
-
|
5/16-18F
|
| Pistol Grip |
SPK-FMG-141 |
-
|
-
|
| Handle Assembly |
SPK-DF-HANDLE |
-
|
-
|
| Battery Eliminator, 120/230V |
SPK-DFX-UBE |
|
|
| Carrying Case |
SPK-FMG-149 |
|
|
