Lloyd Instruments TG4975 3-Point Bend Jig for Polystyrene
This fixture is designed to perform three point bend tests on
polystyrene samples measuring 300 x 150 x 50 mm (11.81 x 5.91 x 1.97 in)
in accordance with the standard EN 12089: 1997 (Method B).
The jig consists of an extruded aluminium base with a fixed centre of
250 mm (9.84 in). Two circular supports 30 mm (1.18 in) in diameter, are
fitted to the base. The sample is placed centrally on the two supports.
An upper loading anvil with a 5/8 in eye end is fixed to the machine's
load cell and driven donw onto the sample midway between the two
supports.
Applicable Standards:
Meets the requirements of EN 12089:1997 Method B
Spec Sheet
