C.S.C. Force Measurement, Inc. :: Test Stands :: Manual Test Stands (Force)
Filter by manufacturer:

Manual Test Stands (Force)

Sort by: Product Price Default
Chatillon: Manual Test Stand- MT150
Chatillon MT150 Manual Test Stand

Chatillon: Manual Test Stand- MT500
Chatillon MT500 Manual Test Stand

Dillon CT Manual Test Stand
Dillon CT Manual Test Stand

Mark-10 TSA750/TSAH750 Lever Operated Test Stand, 750LBf Capacity
The lever operated Force Measurement Test Stand Model TSA750 is a perfect solution for quick-action pull testing and compression testing of up to 750 lb of tensile or compressive force.

Mark-10 TSB100 Manual Test Stand, 100LBf Capacity
The lever operated Force Measurement Test Stand Model TSB100 is an economical solution for quick-action tensile testing and compression testing of up to 100 lb of force.

Mark-10 TSC Manual Test Stand, 1000LBf Capacity
The TSC Force Measurement Test Stand is ruggedly built for testing up to 1,000 lb of compression or tension force. A large hand wheel requires little effort, even at high loads, and a precision Acme screw and nut ensure smooth operation over time.

Mark-10 TSF Manual Test Stand, 1000LBf Capacity
The TSF Force Measurement Test Stand is ideal for spring testing, destructive testing, product integrity testing, and other applications requiring up to 1,000 lb (5,000 N) of push or pull force. The stand features a large side mounted hand wheel requiring minimal user effort and a rigid 3” x 3” column.

Mark-10 Wire Terminal Pull Tester - Model WT3-200
The Mark-10 Model WT3-200 is a pull tester designed to measure the pull-off force of wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1000 N) of pull force. Along with that the wire terminal grip contains several slots can accommodate different size wires up to AWG3 (0.25 in) (6.3 mm) in diameter. The tester has a large, easy-to-read LCD display that shows the user various values from real-time force and peak force to units of measurement as well as much more.

Mark-10: Manual Test Stand - ES10/ES20
The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) for more precise testing with greater consistency in testing results.

Mark-10: Manual Test Stand- ES30
The ES30 Force Measurement Test Stand is a versatile and economical solution for most compression and tensile testing applications. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design.