Mark-10 BG Series Force Gauge
The Series BG Digital Force Gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.
Features:
-
Compatible with all Mark-10 test stands and grips.
-
RS-232, Mitutoyo and analog outputs
-
GCL-Gauge Control Language for full computer control
-
Automatic timed output on RS-232
-
Dual set points with outputs
-
Averaging mode for average readings over time
-
External trigger for contact or switch testing and data capture
-
General purpose I/O for external device control
-
Programmable analog and digital filters
-
Selectable units of measurement
-
Programmable default configuration
-
Peak memory for tensile and compressive forces
-
Push-button calibration
- Battery or AC operation
- Programmable automatic shutoff
- Permanent configuration memory
- Reversible aluminum housing for handheld use or test stand mounting
- Same housing size for all capacities
Accuracy: ± 0.2% of full scale ±1 digit
Safe overload: 150% of capacity
Battery life: 8-10 hours per charge
Weight: 0.9 lbs (0.4 kg)
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating) Warranty: 3 years
CE mark
