The Series BG Digital Force Gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.






Features:

• Compatible with all Mark-10 test stands and grips.
• RS-232, Mitutoyo and analog outputs
• GCL-Gauge Control Language for full computer control
• Automatic timed output on RS-232
• Dual set points with outputs
• Averaging mode for average readings over time
• External trigger for contact or switch testing and data capture
• General purpose I/O for external device control
• Programmable analog and digital filters
• Selectable units of measurement
• Programmable default configuration
• Peak memory for tensile and compressive forces
• Push-button calibration
• Battery or AC operation
• Programmable automatic shutoff
• Permanent configuration memory
• Reversible aluminum housing for handheld use or test stand mounting 
• Same housing size for all capacities

Accuracy: ± 0.2% of full scale ±1 digit

Safe overload: 150% of capacity

Battery life: 8-10 hours per charge

Weight: 0.9 lbs (0.4 kg)

Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating) Warranty: 3 years

CE mark