Mark-10 RG Series Force Module
(used for integration and automation applications)
The RG smart load cell is a plug-and-play force measurement building block designed for integration within assembly systems, weighing systems, and other process automation and testing automation applications. All functions are controlled by commands sent from a PC or PLC via its RS-232 connector. The RG's ASCII command library allows for peak force recall, set points, data averaging, data filtering, calibration, and many other functions. A rugged aluminum housing makes the RG durable enough to withstand the rigors of manufacturing environments. Capacities are available from 2 lb to 200 lb (10 N to 1000 N).
Features:
- Measures tension and compression forces
- Dedicated force limit outputs for direct hardware control (relays, etc)
- RS-232 and Mitutoyo outputs
-
GCL-Gauge Control Language for full computer control
-
Averaging mode for average readings over time
-
External trigger for contact or switch testing and data capture
-
General purpose I/O for external device control
-
Programmable digital filters
-
Selectable units of measurement
-
Programmable default configuration
-
Peak memory for tensile and compressive forces
-
Power via 9 - 12 VDC
-
Same housing size for all capacities
-
Optional cable with bare leads for integration with PC/PLC and external power supply
Accuracy: ± 0.5% of full scale ±1 digit
Safe overload: 150% of capacity
Weight: 0.55 lbs (0.25 kg)
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
Warranty: 3 years
CE mark
Spec Sheet
