C.S.C. Force Measurement, Inc. :: Force Gauges :: Digital Force Gauges :: Mark-10 Series 7 Digital Force Gauge

Mark-10 Series 7 Digital Force Gauge

Mark-10 Series 7 Digital Force Gauge
Mark-10 Digital Force Gauge
~ Series 7 ~



                The Mark-10 Series 7 Digital Force Gauge is the professional version of all the Series Force Gauges. This gauge is designed to handle demanding tension and compression measurement applications up to 500lbF (2500N) capacity. Some features the gauge has are 0.1% accuracy, a blazing fast sampling rate of 14,000 Hz, as well as producing reliable results for incredibly quick-action tests.

                The Series 7 is like the Series 5 with some added features including high speed continuous data capture & storage, a programmable footswitch, break detection and 1st / 2nd peak detection. The gauge includes a coefficient of friction unit of measure as well as a user-defined unit of measurement. Productivity can be enhanced by using the gauges automatic data output, data storage and zeroing function upon the completion of break detection, averaging, external trigger and 1st / 2nd peak detection.

 

** Series 7 force gauges are directly compatible with Mark-10 test stands including the Mark-10 ESM301/ESM301L.



Features & Specifications:
  • High-speed 14,000 Hz sampling rate and Accuracy of 0.1% of full scale
  • Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC
  • Individual data point memory for up to 5,000 data points, downloadable to a PC
  • USB, RS-232, Mitutoyo, and analog outputs
  • Sample break detection with auto functions, including stopping movement on the ESM301(L) Test Stand
  • 1st / 2nd peak detection
  • Automatic output / data storage / zeroing upon various event completions
  • 5 units of measurement, plus Coefficient of Friction, and user-defined unit with configurable name
  • Programmable footswitch command string
  • Programmable set points, with indicators and outputs
  • Averaging mode - calculates average readings over time
  • External trigger mode - for switch contact testing or remotely stopping display update
  • Password protection, configurable for individual keys and calibration
  • Power: AC or Rechargeable battery. (Gauge automatically shuts off when power is too low.)
  • Battery Life: Backlight On - lasts up to 7hrs of continuous use   /   Backlight Off - lasts up to 24hrs of continuous use
  • Outputs: USB / RS-232: Configurable up to 115,200 baud. Auomatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.
                  Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
                  Analog: 1 VCD, 0.25% of full scale at capacity,
                  General purpose: Three open drain outputs, one input.
                  Set points: Three open drain lines.
  • Safe Overload: 150% of full scale (Display will show "OVER" at 110% and up)

Specialized Gauge Functions:

 ~ High Speed Data Capture & Storage

                The Series 7 can capture & store up to 5,000 data points at a rate of 14,000 readings per second. This function is perfect for capturing switch activation forces, sharp breaks and other short-duration applications. Configurable start and stop triggers are provided. The data acquisition rate can be varied depending on the event. It can be slowed to capture long events such as structure relaxation, material expansion as well as other applications. The data stored on the gauge can be exported to data collection software like MESURgauge. Use of the Series 7 Digital Force Gauge can eliminate cumbersome and expensive data acquisition hardware/software.

 ~ Footswitch Command String

                The user can integrate the Series 7 with the footswitch/automation system which improves testing ergonomics and efficiency. By doing this there is no need for multiple key presses. Up to three steps can be programmed for a single footswitch activation. There are several commands that the user can choose from. For example zero the display, save to memory and request peak reading. Also time delays can be placed in between each step if needed.

 ~ Automatic Data Output / Save / Zero / I/O Pin Toggle

     Automatic Data Output allows for the Series 7 to be able to perform the following functions once several event types have been completed:

A.)  Save the peak reading to memory.

B.)  Transmit the peak reading via USB, RS-232, or Mitutoyo output

C.)  Zero the display

D.)  Toggle an I/O pin (example: stop movement of an ESM301/ESM301L test stand)

             Some of the applicable events the Series 7 have to complete are: 1. Sample break detection, 2. Completion of an averaging sequence, 3. External Trigger (example: switch activation), and 4. First and Second peak capture (example: tensile testing).

  ~ User-defined Unit of Measurement

The Series 7 gauge has 6 standard units of measurement with one additional unit that allows for unique applications.

            Typical Applications:

            1. Measuring torque produced by pressing a level in a mechanical assembly then configuring the multiplier based on the length of the lever therefore results in converting a unit. (example: N into Ncm)

            2. Measuring pressure produced by a circular compression plate on a foam sample then configuring the multiplier based on the area of the plate therefore results in a conversion of a unit. (example: lbF into psi)




Model Capacity x Resolution
lbF ozF kgF gF N kN mN
M7-012 0.12 x 0.00002 2 x 0.0005 - 50 x 0.01 0.5 x 0.0001 - 500 x 0.1
M7-025 0.25 x 0.00005 4 x 0.001 - 100 x 0.02 1 x 0.0002 - 1000 x 0.2
M7-05 0.5 x 0.0001 8 x 0.002 - 250 x 0.05 2.5 x 0.0005 - 2500 x 0.5
M7-2 2 x 0.0005 32 x 0.01 1 x 0.0002 1000 x 0.2 10 x 0.002 - -
M7-5 5 x 0.001 80 x 0.02 2.5 x 0.0005 2500 x 0.5 25 x 0.005 - -
M7-10 10 x 0.002 160 x 0.05 5 x 0.001 5000 x 1 50 x 0.01 - -
M7-20 20 x 0.005 320 x 0.1 10 x 0.002 10000 x 2 100 x 0.02 - -
M7-50 50 x 0.01 800 x 0.2 25 x 0.005 25000 x 5 250 x 0.05 - -
M7-100 100 x 0.02 1600 x 0.5 50 x 0.01 50000 x 10 500 x 0.1 - -
M7-200 200 x 0.05 3200 x 1 100 x 0.02 - 1000 x 0.2 1 x 0.0002 -
M7-500 500 x 0.1 8000 x 2 250 x 0.05 - 2500 x 0.5 2.5 x 0.0005 -


**All models come with a 110V AC adapters. If a different adapter is need please be sure to specify which one. {E for euro plug (220V),U for UK plug (220V) or A for Australian plug (220V).}



Details
SKU M10-Series 7
Please call for a quote: (800) 866-3672

Click here to ask a question about this product

Name: *
Email: *
Telephone: *
Question(s): *
Code:  
Enter Code: *
   

Send to friend

: *
: *
: *
Type the characters you see in the picture: