C.S.C. Force Measurement, Inc. :: Test Stands :: Motorized Test Stands (Torque) :: Mark-10 TSTM Motorized Torque Stand

Mark-10 TSTM Motorized Torque Stand

          The TSTM Motorized Torque Measurement Test Stand is ideal for a wide variety of torque testing applications up to 100 lbin, including closure torque testing, fastener torque testing, and more. Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests. Versatile modular design allows the stand to be configured for a variety of torque sensors and gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The stand includes a torque loading plate with tapped holes for grip and custom fixture mounting and a resettable angle indicator.

**Available in vertical and horizontal orientations.


* Maximum load: 100 lbin (11.3 Nm)
* Speed range: 0.3-8.6 RPM (4-52/s)
* Speed accuracy: 5% of setting
* No speed variation with load
* Maximum angular travel: no limit
* Throat: 4.10" (104 mm)
* Manual adjustment: 12/knob rev
* Angle dial with 2 resolution (optional digital angle indicator has 0.1 resolution, see below)
* Maximum slider travel: 15.5" (394 mm)
* Slider travel rate: 1.047" (26.6 mm) / lever rev
* Line voltage: 80-240 VAC 50/60 Hz
* CE mark


* Series STJ Universal torque sensors
Mount directly to the TST. A wide range of capacities is available.

* BGI Force/torque gauge
The BGI displays the torque readout of the STJ sensor. Series MGT torque gauges can also be used.

* Digital angle indicator
Displays cw or ccw angle in 0.1 resolution for approximately 278 rotations, resettable with "zero" button. Accurate to 0.7. Includes backlight. Three sets of mounting holes allow the indicator to be mounted perpendicular to, or parallel to the test stand column. It can also be repositioned along the column. Rugged aluminum housing.

* Jacobs chuck grip
Universal grip for samples or custom fixtures. Available in capacities of 1/4", 3/8", and 1/2". Mounts to the torque plate.

* Closure grip
Universal grip for closures up to 4.8" dia.

* Overload protection module
Protects against accidental overloads during motorized tests. Adjustable from 20 - 110% of the sensor's capacity.

* Set point cable
Stops test stand rotation at programmable high and low set points for clockwise and counterclockwise torque. Requires the BGI.

* Column extension
Column can be extended to custom lengths

Weight 40.00 lbs
Please call for a quote: (800) 866-3672

Name: *
Email: *
Telephone: *
Question(s): *
Enter Code: *

: *
: *
: *
Type the characters you see in the picture: