Mecmesin 'Smart' S-Beam (for use with Mecmesin AFTI and AFG)
'SMART' S-Beam loadcells provide a versatile solution to general force measurement applications where space is not restricted.
Mecmesin 25kN Wedge Grip
These high capacity self-tightening wedge grips are designed to ensure quick and easy clamping of a wide variety of components and materials. Their capstan action speedily loads the sample securely in the jaws prior to the test. The wedge grips come with 30mm x 45mm cross-hatch jaw faces maximizing the clamping force and reducing slippage.
Mecmesin 3 Point Bend Fixture 10kN
The 3-point bend fixture is ideal for performing a variety of flexible tests up to 10kN capacity. It includes two lower support anvils, which are adjustable between 20 -292mm (0.79" - 11.5") and one upper center loading anvil to accommodate different sized samples. The support beam is graduated length ways in metric and imperial units for accurate positioning of the anvils. Standard anvil radius is 5mm (0.197").
Mecmesin 500N and 200N Wedge Grips
These small, lightweight wedge grips are ideal for tensile testing below 500N. A spring-loaded lever ensures the serrated jaws are easy to open for fast securing and release of samples. As load is applied the wedge action of the jaws ensures the sample is held rigidly without slippage. Jaw width is either 16mm or 25mm (200N) capacity.
Mecmesin 5kN Wedge Grip
This wedge grip is ideal for tensile testing below 5000N of flat and rigid materials including plastics, rubber and light metals. A spring-loaded lever ensures the serrated jaws are easy to open for fast loading and release of samples up to 25mm wide and 8mm thick. As load is applied the wedge action of the jaws ensures the sample is held rigidly without slippage.
Mecmesin Advanced Force/Torque Gauge (AFTI) - MK4
The Advanced Force & Torque Indicator works in conjunction with Mecmesin 'SMART' sensor and can be used handheld or fixed to a test jig for optimum measurement performance.
Mecmesin Basic Force Gauge (BFG) MK4
The mid-range BFG is an easy-to-use, affordable force instrument.
Mecmesin Cable Cam Grip Small
Cable Cam Grips are designed for holding insulated cables and wire up to 6mm (0.24") in diameter and are usually fixed to the base of a Mecmesin test stand. The sample is secured by the cam, which self-tightens as load is applied and spreads the load evenly, minimising slippage during testing. Cable Cam Grips are available with either smooth or serrated cams. They are commonly used with a "Wedge Grip" or "Rotating Crimp Receptacle" to test crimp terminals in accordance with BS 5G 178-1 and other international standards.
Mecmesin Child Resistant Closure Tester (CRC)
The CRC tester from Mecmesin, is a highly accurate tester, capable of measuring both the security and accessibility of child-resistant closures. The 'push' and 'twist' action used to open a CRC closure is shown clearly on two dedicated displays for easy identification of both force and torque values.
