Lloyd Instruments TG4977 Credit Card Peel Jig
There are two types of Credit Card Peel Jig; the 90 degree and the 180 degree.
Lloyd Instruments TG5093 Peel Fixture for Heat Sealed Plastic Film Covers on Food Containers
This fixture consists of a small upper spring loaded wedge grip to clamp the film container cover, and a horizontal sliding bed fitted with a "dish holder".
Lloyd Instruments TG5346 Peel Fixture for Yoghurt Pot Foil Seals
This custom designed fixture consists of an angled platform that can slide along the base plate and be locked into position by thumb screws to enable the edge of the foil lid of the container to be positioned on the machine centre line. A fully adjustable clamping arm, which can move vertically and horizontally according to the sample size, secures the container at the predetermined angle on the testing platform.
Mark-10 G1045 90-degree Peel Fixture
This fixture is designed for applications in the packaging and food and beverage industries. Typical applications include the testing of adhesives, films, and packaging, such as foil seals found on yogurt containers, juice containers, and others.
Mecmesin Pull Peel Wheel Fixture
The Pull Peel Wheel Fixture is designed for mounting to the base of a motorized test stand to test the peel strength of flexible adhesive-backed materials. Samples are wound around the Pull Peel Wheel and the free end is clamped in a suitable upper grip connected to a load cell. As the test stand cross head is driven in the tensile direction, the sample will peel off at a constant 90° angle peel. The wheel is mounted on free-running bearings to minimize friction.
