Filter by manufacturer:

Self-Tightening Grips

Chatillon: Fixture- ML1821 Smooth Faced Cam Operated Grips
Chatillon ML1821 Smooth Faced Cam Operated Grips

Chatillon: Grip- GF-6 Cam Operated Grips
Chatillon GF-6 Cam Operated Grips

Chatillon: Grip- GF-7 Cam Operated Grip
Chatillon GF-7 Cam Operated Grip

Lloyd Instruments TG10 Eccentric Roller Grip 25mm
These general purpose self-tightening grips feature an eccentric roller design ideal for dumbbell and flat specimens. The roller operates using a basic cam jamming principle. The rollers have a cross-hatched, serrated finish that help prevent slipping. Clamps hold the sample securely against the horizontally grooved back face. Maxiumum sample width is 25 mm (0.98 in). Maximum sample thickness 5 mm (0.2 in).

Lloyd Instruments TG14 Self-Tightening Roller Grip
This grip incorporates a sliding, self-tightening roller ideal for flat, ductile specimens. The rollers have a cross hatched, serrated finish that help to prevent the sample from slipping. Maximum sample width is 25 mm (0.98 in). Maximum sample thickness 5 mm (0.2 in).

Lloyd Instruments TG20 Self-Tightening Bollard Grip
The sample is mounted over the bollard and positioned between the bollard and the grip shank. Maximum sample width is 50 mm (1.97 in). Maximum sample thickness 4 mm (0.16 in).

Lloyd Instruments TG210 Self-Tightening Scissor Grips
These general purpose, self-tightening grips are ideal for dumbbell and flat specimens. Jaw faces have a cross hatched serrated surface with a pitch of 1.5 mm (0.6 in). Maximum sample width is 100 mm (3.94 in). Maximum sample thickness 35 mm (1.38 in).

Lloyd Instruments TG22 Eccentric Roller Grip 50mm
These general purpose, self-tightening grips feature an eccentric roller design ideal for dumbbell and flat specimens. The roller operates using a basic cam jamming principle. The rollers have a cross-hatched, serrated finish that help prevent slipping. Clamps hold the sample securely against the horizontally grooved back face. Maximum sample width is 50 mm (1.97 in). Maximum sample thickness 5 mm (0.2 in).

Lloyd Instruments TG32 Lightweight Spring-Loaded Clamp Grip
This lightweight, spring-loaded grip has rubber faces and is ideal for very light force measurements. Maximum sample width is 5 mm (0.19 in). Maximum sample thickness 1 mm (0.04 in). Maximum sample diameter 1 mm (0.04 in)

Lloyd Instruments TG65 Double Bollard Grip
This double bollard grip is ideal for tensile testing of seat belts, safety harnesses and similar products. Maximum sample width is 60 mm (2.36 in). Maximum sample thickness 5 mm (0.2 in).