This wedge grip is ideal for tensile testing below 5000N of flat and rigid materials including plastics, rubber and light metals. A spring-loaded lever ensures the serrated jaws are easy to open for fast loading and release of samples up to 25mm wide and 8mm thick. As load is applied the wedge action of the jaws ensures the sample is held rigidly without slippage.

These small, lightweight wedge grips are ideal for tensile testing below 500N. A spring-loaded lever ensures the serrated jaws are easy to open for fast securing and release of samples. As load is applied the wedge action of the jaws ensures the sample is held rigidly without slippage. Jaw width is either 16mm or 25mm (200N) capacity.

These high capacity self-tightening wedge grips are designed to ensure quick and easy clamping of a wide variety of components and materials. Their capstan action speedily loads the sample securely in the jaws prior to the test. The wedge grips come with 30mm x 45mm cross-hatch jaw faces maximizing the clamping force and reducing slippage.

This compact self-tightening grip with a capacity of 100 lb (500 N) is ideal for a range of low force tensile testing of small samples. The serrated steel jaws are easily opened with a spring-loaded lever.

This heavy duty self-tightening grip with a capacity of 1200 lb (5.3 kN) is ideal for a range of tensile testing requirements. The serrated steel jaws are easily opened with an ergonomic spring loaded knob and rack and pinion type mechanism. The jaws ride on rollers instead of sliding along the surface of the housing, as with conventional wedge grips. This unique design prevents jamming and improves gripping characteristics.

This heavy duty, capstan action parallel wedge grip helps ensure the sample is held securely prior to the test. The grips are supplied with 0-20 mm (0-0.79 in) straight cut jaw faces for testing flat samples up to 12 mm (0.47 in) thick and 50 mm (1.97 in) wide. Round samples up to 40 mm (1.57 in) in diameter may also be tested when using the appropriate optional V-notch jaw faces, available in three different sizes.

This capstan action wedge grip is supplied with 50 x 70 mm (1.97 x 2.76 in) cross cut jaw faces as standard for testing flat samples up to 28 mm (1.1 in) thick and 50 mm (1.97 in) wide. Round samples up to 36 mm (1.42 in) in diameter may also be tested using the appropriate optional V-notch jaw faces. V-notch jaw faces are available in three different sizes.

This capstan action, parallel wedge grip is supplied with straight cut jaw faces as standard. It is ideal for flat or round samples. The capstan action holds the sample securely in the jaws prior to the test. Maximum sample width is 25 mm (0.98 in). Maximum sample thickness 16.5 mm (0.65 in). A range of optional cross cut and V-notch cut jaw faces are also available.

This capstan action, parallel wedge grip is supplied with straight cut jaw faces as standard. It is ideal for flat or round samples. The capstan action holds the sample securely in the jaws prior to the test. Maximum sample width is 25 mm (0.98 in). Maximum sample thickness 11.5 mm (0.45 in). A range of optional cross cut and V-notch cut jaw faces are also available.

This general purpose self-tightening sliding wedge grip is supplied with 25 x 50 mm (0.98 x 1.97 in) straight cut jaw faces. Maximum sample width is 25 mm (0.98 in). Maximum sample thickness 10 mm (0.39 in). Optional cross cut and V-notch cut jaw faces are also available.