Filter by manufacturer:

Wire Analysis Grips

Chatillon: Fixture- GF-10 Wire Terminal Testing Fixture
Chatillon GF-10 Wire Terminal Testing Fixture

Chatillon: Fixture- GF-3 Grooved Snubber for Wire
Chatillon GF-3 Grooved Snubber for Wire

Chatillon: Fixture- ML-1785 Terminal Testing Turret
Chatillon ML-1785 Terminal Testing Turret

Chatillon: Fixture- ML1821 Smooth Faced Cam Operated Grips
Chatillon ML1821 Smooth Faced Cam Operated Grips

Chatillon: Fixture- ML4244 Wrapped Wire Connector Fixture
Chatillon ML4244 Wrapped Wire Connector Fixture

Chatillon: Grip- GF-4 Miniature Filament Fixture
Chatillon GF-4 Miniature Filament Fixture

Chatillon: Grip- GF-5 Figure 8 Fixture for Wire and Cord
Chatillon GF-5 Figure 8 Fixture for Wire and Cord

Lloyd Instruments GF-10 Wire Terminal Testing Fixture
This fixture has been specifically designed to test the ultimate strength of wire/terminal connections. The upper grip consists of a self-aligning wheel, which features nine equally spaced slots to hold standard terminal shank sizes. Ring terminals are secured with a pin in line with the largest slot. The bottom grip has an eccentrically mounted self-tightening knurled roller, which will accept wire up to 3.2 mm (0.13 in) in diameter.

Lloyd Instruments TG11 Wire Analysis Grips
This vice action grip features replaceable aluminum facing disks, plus other optional faces made of either leather or rubber for delicate specimens. Maximum sample diameter 1.6 mm (0.06 in).

Lloyd Instruments TG12 Bollard Grip
The sample is wrapped around the bollard and the free end is clamped firmly into place. Grip stresses in the specimen are distributed in the material in contact with the bollard circumference. Maximum sample diameter 5 mm (0.2 in).